DiGidot C4 Skrócona instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler DiGidot C4. DiGidot C4 15 stron.
Również dla DiGidot C4: Szybka konfiguracja ręczna (2 strony)

Drukuj stronę

Con guring the DiGidot C4

To start using the DiGidot C4 as intended meaning to

start controlling LED lights ﬁrst the device should be

conﬁgured. Initial conﬁguration includes naming the

DiGidot C4, giving it an IP address and Subnet mask

which the Art-Net software/device will recognize. Last

step is to conﬁgure the number of universes and the

type of LEDs that you will use it with.

To conﬁgure the device you go to Settings. From there

you can change the IP address and subnet mask of the

DiGidot C4. The IP must always start with 10, for your

computer to recognize it. The Subnet Mask should

always stay 255.0.0.0.

Note that those are default settings for working with

the DiGidot C4. Alternatively the DiGidot can match

your local network settings to work in your network

e.g. 192.168.x.x (be sure to update your own network

to match the DiGidot C4 Network settings)

Once the device is named and given a recognizable IP

address the next step is to conﬁgure the amount of

universes and the type of LED they will be used with.

From the button 'Select an output' you can choose

the type of LED source the DiGidot C4 will be used

with. Then the number of universes used can be

adjusted.

Conﬁguring the type of LED that will be used with the

DiGidot C4 will then allow you to connect your LED

lights or DMX512 properly to the DiGidot C4. On the

next page the meaning of each of the outputs on the

DiGidot C4 is displayed and how they vary depending

on the type of output that is used.