Creek Audio 4040 A Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Creek Audio 4040 A. Creek Audio 4040 A 13 stron.

DIGITAL INPUTS

Bluetooth

Select Bluetooth input and search for "CREEK AUDIO 4040A" on your mobile device. Up to 5 devices can be

remembered by the 4040 A.

If "CREEK AUDIO 4040A" is not immediately available when searching, it may be due to all 5 addresses being taken. If

so, go to the "SETUP MENU" and select BT Pairing, then select "Pair a new device" or, "Clear all paired devices".

"Clear all paired devices" will force the 4040 A to forget ALL previously paired devices.

Your mobile BT device's volume may be set at minimum, so check, and if necessary, increase the volume on the

mobile device to maximum and adjust the desired level from the amplifier to achieve higher audio resolution.

Alternatively, if you prefer, adjust the amplifier's volume to approximately '40' and then control the volume from

your mobile device for convenience.

Bluetooth radio reception range is restricted by walls and other physical obstructions to less than 15m, or 50 feet.

USB

USB Class 2 Audio is the preferred method of connecting high-resolution digital audio signals from a computer or

high-end network streamer to the 4040 A. Use a USB type A male, to USB type B male (printer) cable, not longer

than 5m (16 feet). The 4040A's DAC can resolve high-resolution digital signals greater than 24-Bit 192kHz, and DSD64

music files.

OPTICAL

Optical cables are, by their nature, ground-isolated and can be purchased in various lengths and quality. Optical

SPDIF – TOSLINK has a maximum resolution of 24-bit 192kHz.

COAXIAL

Use a good quality 75 Ohm (RG59U) shielded cable for best results. The maximum resolution for passing SPDIF

signals via coaxial cable is 24-bit 192 kHz. To prevent unwanted ground loops, the Coaxial input is transformer

isolated from ground.

Page: