Crescent C2000E Instrukcja montażu
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Systemy podnoszenia Crescent C2000E. Crescent C2000E 2 stron. Body lift
Również dla Crescent C2000E: Instrukcje użytkowania (2 strony)
Drukuj stronę5
(A)
(B)
6
7
ATTACH BATTERY TO SUPPORT
1. Using 3 PHILLIPS HEAD SCREWS K,
attach battery to back of SUPPORT.
ATTACH JACK BASE TO SUPPORT
1. Slip JACK BASE into SUPPORT
2. Use BOLT C,12mm NUT,
WASHER F and WASHERS E
to secure JACK BASE with
allen wrench.
Support
Jack Base
C
E E
12mm
F
ATTACH JACK TOP TO ARM
1. Slip JACK TOP into ARM.
2. Use BOLT D,12mm NUT,
WASHER F and WASHERS E
to secure JACK TOP to
SUPPORT with allen wrench.
ARM
Jack Top
D
12mm
E E
F
ATTACH CRADLE TO ARM
1. Lay CRADLE onto table.
2. Slip ARM into CRADLE
3. Use BALL and PIN to secure CRADLE
Cradle
to ARM
Arm
Assembly Instructions
(A)
C2000E BODY LIFT
Arm
(B)
Braces
Leg
3" Caster
READ THESE INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN ASSEMBLY.
If there are any instructions that are not understood, please call our customer
The C2000H (Hydraulic) and the C2000E (Electronic) Body Lifts and their
accessories are guaranteed against defect in material and workmanship for a
1
07/10
Cradle
Support
service department at 1-888-856-4516.
LIMITED WARRANTY
period of ONE YEAR from date of
purchase. Limited to repair or replacement at
Crescent Sales discretion.
CONNECT 3" CASTERS TO BOTTOM OF LEG
1. Turn LEG over so that the 7
holes face upward.
2. Screw each CASTER into
LEG clockwise.
IMPORTANT: CASTER must be completely
screwed into leg before any object can be
lifted. Otherwise, damage will occur.
4975 West Main Street
Tupelo, MS 38801
662-844-8779
1-888-856-4516
Fax 1-888-299-8986
www.crescentsales.com
email: