Cresco 10SW Podręcznik - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik dla Rozrzutnik Cresco 10SW. Cresco 10SW 15 stron. Fertilizer and salt spreader
Również dla Cresco 10SW: Podręcznik (6 strony)
Assembling your Cresco 10
13
Feed the other end of the
control rod (item 15) through the
hole of the control lever (17).
Make sure you push the control
lever all the way to setting 20.
Do not tighten into place.
16
Affix the agitator pin (Item 8)
through the impellor shaft inside
the hopper.
FINAL TOUCHES:
14
IMPORTANT
Summer slider pictured
Before tightening the control
rod. Make sure the application
holes in the hopper are fully
open and the control lever is
set at 20.
5
15
With the hopper aperture fully
open (as in figure 13) and the
gauge lever set at 20, tighten
the screw firmly to secure the
control rod.