Cisco 2950 - Catalyst Switch Podręcznik - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 19 stron. Long-reach ethernet switches
Również dla Cisco 2950 - Catalyst Switch: Podręcznik rozwiązań (17 strony), Biuletyn produktu (3 strony), Biuletyn wsparcia produktu (5 strony), Podręcznik migracji (25 strony), Biuletyn wsparcia produktu (6 strony), Podręcznik dla początkujących (29 strony), Arkusz danych (20 strony)

Drukuj stronę

Cisco - Connecting a Terminal to the Console Port on Catalyst Switches

Use a null-modem cable to connect the switch to a remote DCE device, such as a modem or a Data

Service Unit (DSU). Use a straight-through cable to connect the switch to a data terminal equipment

(DTE) device, such as a terminal or a PC.

The console port of the Catalyst 4000 Supervisor Engine I uses a DB-25 connector and supports Data

Terminal Ready (DTR), Data Set Ready (DSR), Clear To Send (CTS), and Request To Send (RTS)

handshake signals.

Table G-1

Table G-1: Catalyst 4003 Console Port Pinouts

Signal

Ground

RxD

TxD

CTS

RTS

Ground

DTR

DSR

Connecting a Terminal to the Catalyst 4000/4500

Supervisor Engine II/II+/III/IV, 2948G, 2980G, and

4912G

You may configure the Catalyst 4000/4500 series switches from a direct console connection to the

console port.

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female data terminal equipment (DTE)

adapter (labeled "Terminal") to connect the console port to a PC running terminal emulation

software. If you are using a direct console connection, configure your terminal emulation program

for 9600 baud, 8 data bits, no parity, and 1 stop bit.

Table H-1

lists the switch console port pinouts. Use a straight-through cable to connect the switch to a

DTE device, such as a terminal or a PC.

Table H-1: Catalyst 4000/4500 Supervisor II and higher, 2948G, 2980G, and 4912G Console Port

http://www.cisco.com/warp/public/473/9.html (14 of 19) [9/4/2003 12:36:03 PM]

lists the Catalyst 4000 Supervisor Engine I console port pinouts.

Direction

Input

Receive Data

Output

Transmit Data

Input

Clear To Send

Output

Request To Send

Output

Data Terminal

Input

Data Set Ready

Description