Cisco 2960-C Podręcznik dla początkujących - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Przełącznik Cisco 2960-C. Cisco 2960-C 25 stron.
Również dla Cisco 2960-C: Instrukcja instalacji (37 strony)
Drukuj stronę
Catalyst 3560-C and 2960-C Switch Getting Started Guide
Switch RJ-45 Console Port
Switch USB Mini-Type B Console Port
Other Management Options
OL-23802-02
Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC.
1.
Connect the other end of the cable to the console port on the switch.
Start a terminal-emulation program on the PC.
2.
Configure the PC terminal emulation software for 9600 baud, 8 data bits, no
3.
parity, 1 stop bit, and no flow control.
Use the CLI to enter commands to configure the switch. See the software
4.
configuration guide and the command reference for more information.
If you use the USB-mini console port, you must install the Cisco Windows USB
device driver on the PC that is connected to that port. See the switch hardware
installation guide for installation instructions.
Start a terminal-emulation program on the PC.
5.
Configure the PC terminal emulation software for 9600 baud, 8 data bits, no
6.
parity, 1 stop bit, and no flow control.
Use the CLI to enter commands to configure the switch. See the software
7.
configuration guide and the command reference for more information.
You cannot use the switch console port and the switch USB-mini console
Note
port at the same time to access the CLI.
You can use SNMP management applications such as CiscoWorks LAN
Management Solution (LMS) and Cisco netManager to configure and manage the
switch. You also can manage it from an SNMP-compatible workstation that is
running applications such as Cisco netManager or SunNet Manager.
The Cisco Configuration Engine is a network management device that works with
embedded Cisco Networking Services (CNS) agents in the switch software. You
can use it to automate initial configurations and configuration updates on the
switch.
Catalyst 3560-C and 2960-C Switch Getting Started Guide
11