Cisco 3750 - Catalyst EMI Switch Podręcznik dla początkujących - Strona 20

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Przełącznik Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 33 stron. Catalyst 3750 series switches
Również dla Cisco 3750 - Catalyst EMI Switch: Arkusz danych (18 strony), Instrukcje instalacji (47 strony), Faq (10 strony), Biuletyn produktu (5 strony), Biuletyn wsparcia produktu (6 strony), Przegląd produktów (25 strony), Opis (1 strony), Arkusz danych (23 strony), Biuletyn wsparcia produktu (6 strony), Podręcznik dla początkujących (27 strony), Arkusz danych (23 strony)

Drukuj stronę

Cisco 3750 - Catalyst EMI Switch Podręcznik dla początkujących

Install the SFP Modules and Connect to the Ports

Follow these steps:

Grasp the module on the sides, and

Step 1

insert it into the switch slot until you

feel the connector snap into place.

Insert an appropriate cable into the

Step 2

module port. Insert the other cable

end into the other device.

For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on

installing, removing, and connecting to SFP modules, see the documentation that came with the

SFP module.

Removing and installing an SFP module can shorten its useful life. Do not remove and

Caution

insert SFP modules more often than is absolutely necessary.

Verify Port Connectivity

After you connect to the switch port, the port LED turns amber while the switch establishes a link.

This process takes about 30 seconds. Then the LED turns green when the switch and the target device

have an established link. If the LED is off, the target device might not be turned on, there might be a

cable problem, or there might be a problem with the adapter installed in the target device. See the "In

Case of Difficulty" section on page 22 for information about online assistance.

13 X

14 X

SFP module

13 X

14 X

SFP module port

C a ta ly st 3

7 5 0 G

SE RI ES

P o E -2 4

23 X

2 5

2 7

2 6

24 X

2 8