Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Biała księga - Strona 3

Przeglądaj online lub pobierz pdf Biała księga dla Przełącznik Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 19 stron. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Również dla Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Uwaga dotycząca instalacji (14 strony), Podręcznik rozwiązań (17 strony), Uwaga dotycząca instalacji (46 strony), Opis (1 strony), Biuletyn produktu (6 strony), Zawiadomienie (4 strony), Arkusz danych (9 strony), Arkusz danych (18 strony), Biała księga (18 strony), Podręcznik konfiguracji (8 strony), Uwaga dotycząca instalacji (28 strony), Instrukcja rozwiązywania problemów (11 strony), Uwaga dotycząca instalacji (18 strony), Podręcznik użytkownika (17 strony), Uwaga dotycząca instalacji (24 strony), Podręcznik (19 strony), Uwaga dotycząca instalacji (36 strony)

Drukuj stronę

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Biała księga

The changes to the switching mode are done automatically, depending on the hardware installed. No speciﬁc conﬁguration is

necessary on the SFM for typical operation. The current switching mode of the switch fabric module can be monitored through

the Catalyst OS command-line interface (CLI) using the show fabric channel switchmode command. Example 1 shows a

completely fabric-enabled system (all compact mode) and Example 2 shows classic and fabric-enabled line cards in an SFM

system (ﬂow-through and truncated mode).

Example 1: Fabric-Enabled System

The following output is from a conﬁguration with dual supervisor engines, one SFM, and a fabric-enabled line card in slot 3.

Sup2-A> (enable) show fabric channel switchmode

Module Num Fab Chan Fab Chan Switch Mode

------ ------------ -------- ------------ --------------

1 0, 0 compact

1 0, 1 compact

1 0, 2 compact

18 0, 0 n/a

18 1, 1 n/a

18 2, 2 n/a

18 3, 3 n/a

18 4, 4 n/a

18 5, 5 n/a

18 6, 6 n/a

18 7, 7 n/a

18 8, 8 n/a

18 9, 9 n/a

18 10, 10 n/a

18 11, 11 n/a

18 12, 12 n/a

18 13, 13 n/a

18 14, 14 n/a

18 15, 15 n/a

18 16, 16 n/a

18 17, 17 n/a

0 n/a

n/a

0 n/a

n/a

CLI output description for show fabric channel switchmode:

Num Fab Chan—The number of fabric channels that the module is associated with.

Fab Chan—The ﬁrst number is the fabric channel number that the module is associated with. The second number is the fabric

channel number that the SFM is associated with.

Switch mode—Possible output is "ﬂow through," "truncated," "compact." Switch mode applies only to line cards with fabric

and bus connections.

Channel status—Possible output is "ok," "sync error," "CRC error," "heartbeat error," "buffer error," "timeout error," or

"unknown." Channel status applies only to line cards with fabric and bus connections.

Channel Status

unknown

n/a

Cisco Systems, Inc.

Page 3 of 19