Cisco ASR 920 series Podręcznik - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Cisco ASR 920 series. Cisco ASR 920 series 36 stron. Aggregation services router
Również dla Cisco ASR 920 series: Instrukcja instalacji (36 strony), Pierwsze kroki (6 strony), Instrukcja instalacji (42 strony), Instrukcja instalacji sprzętu (46 strony)

Installing the Cisco ASR 920 Series Router

6. Place the removed SFP module in an antistatic bag or other protective environment.

DETAILED STEPS

Step 1

Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

Step 2

Disconnect the cable from the SFP module, and insert a dust plug into the cable end.

For reattachment, note which cable connector plug is send (TX) and which is receive (RX).

Tip

Step 3

Unlock and remove the SFP module, as shown in the following figure.

If the module has a bale-clasp latch, pull the bale out and down to eject the module. If the bale-clasp latch is obstructed

and you cannot use your index finger to open it, use a small, flat-blade screwdriver or other long, narrow instrument to

open the bale-clasp latch.

Figure 19: Removing a Bale-Clasp Latch SFP Module

Step 4

Grasp the SFP module between your thumb and index finger, and carefully remove it from the module slot.

Step 5

For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP module to keep the optical interfaces

clean.

Step 6

Place the removed SFP module in an antistatic bag or other protective environment.

Installing the Cisco ASR 920 Series Router

Remove SFP Modules