DIGISYNTHETIC DS100 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający DIGISYNTHETIC DS100. DIGISYNTHETIC DS100 15 stron. 24-bit digital dual engine multi-effect processor

Drukuj stronę

When the DS100 is in program mode, you can move from one program to the next by either using the <Program

/Data> wheel, the optional Digitech FS-300 footswitch or incoming MIDI program change commands from

another device such as a sequencer or keyboard.

When the DS100 is in edit mode and you wish to abort and return to program mode, simply press the <Program>

button.

3.2 Storing Changes

When a program has been modified, the program number will blink in the number display when the unit is in

program mode. To store changes, press the

user program location to be stored to. This simply means that DS100 is now giving you the option to store this

modified version of the program as a user program at any number from 1 to 99. At this point, you may use the

<Program/Data> wheel to change the storing position to another program number. When the target preset

location (shown in the display) is correct, press the

read:-- indicating that the modified program is being stored.

3.3 Selecting Effect Configurations

The DS100 provides you with five different effect configurations that allow you ultimate flexibility and

versatility in effect routing.

Effect Module Size

Effect Configuration 1 uses one effect module because both processing engines are combined for maximum

processing power. This larger module allows you to have longer delay times and more dense sounding reverbs.

Effect configurations 2-5 use

To select any one of these five different configurations, simply perform the following procedure:

Press the

button and the display will briefly read:

select mode and now the display will appear something like this:

Now turn the

To exit the Effect configuration menu, simply press the

program number until the program change is stored or until you change to the next program.

3.4 Adjusting the Dry Path Global Mix

This editing procedure will allow you to globally turn a Dry signal path Off for use with a mixing consoles'

effects sends or On for use with single instrument input signals(such as guitar, saxophone and others). The

procedure is as follow:

<Store>

size effect modules which allow you to use two effects per program.

Half

CLIP

-10

-20

ENGINE A

MOD

DELAY REVERB OTHER

PITCH

ENGINE B

CLIP

-10

-20

wheel until the desired configuration appears ( - ) in the display.

button once. The display alternates between

button once again. The display will momentarily

indicating that you are in the configuration

-30

button where the display will flash the

and the

Page 6