Sharp AR-C360P Instrukcja instalacji oprogramowania - Strona 26
Przeglądaj online lub pobierz pdf Instrukcja instalacji oprogramowania dla Wszystko w jednej drukarce Sharp AR-C360P. Sharp AR-C360P 29 stron. Sharp ar-c360p: supplementary guide
Również dla Sharp AR-C360P: Podręcznik drukowania (46 strony)
Drukuj stronę
8. Pull the finisher platform about half way out,
then loosen the screw on the locking piece (
viewed from the opposite direction) so that it
drops through the slot below it. This keeps the
platform from moving while you attach the
finisher to it.
9. Position the finisher on the stand and attach
it with two screws from the back.
!
:
10. Lift the locking piece back up and tighten the
screw firmly. Be sure it's out of the way and
the screw is tight—otherwise the platform
will not move freely.
11. Install the stacker, making sure the hooks
are firmly engaged and that the lever on the
finisher is positioned above the stacker (
7
!
).