Sharp AR-C360P Instrukcja instalacji oprogramowania - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja instalacji oprogramowania dla Wszystko w jednej drukarce Sharp AR-C360P. Sharp AR-C360P 29 stron. Sharp ar-c360p: supplementary guide
Również dla Sharp AR-C360P: Podręcznik drukowania (46 strony)
Drukuj stronę
12. Secure the stacker with four screws.
13. Push the finisher against the printer until the
prongs on the printer brackets fit into the
holes in the finisher.
If you need to, turn the levellers (
Note:
either side of the finisher to raise or
lower it so the holes and prongs align
properly. Make sure the finisher is level.
Step 5: Make Connections
1. Connect the finisher's cable to the inverter
(
!
). Use the cable supplied to connect the
inverter to the printer (
2. Plug the power cord supplied into the
!
) on
inverter, then connect it to a suitable
grounded outlet.
3. Reconnect the printer's interface cable.
4. Plug in the printer's power cord and turn on
the printer.
Note:
"
).
When the printer is turned on, power
is supplied to both the printer and the
finisher.