Sharp DX-C200 Skrócona instrukcja obsługi - Strona 21
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Sharp DX-C200. Sharp DX-C200 44 stron. Digital full colour multifunctional system
Również dla Sharp DX-C200: Specyfikacje (2 strony)
Drukuj stronę
If you have more originals to scan, press [Yes] within 60 sec-
onds, place the next original on the exposure glass, and then
press [OK]. Repeat this step until all originals are scanned.
If you do not press [Yes] within 60 seconds, the machine will start to dial
the destination.
When all originals have been scanned, press [No] to start
sending the fax.
•
To cancel sending a fax, press the [Facsimile] key, and then press the [Clear/Stop] key.
•
A fax number can contain 0 to 9, pause, "
•
If necessary, insert a pause in a fax number. The machine pauses briefl y before it dials the
digits following the pause.
•
To use tone services on a pulse-dialing line, insert "
mode from pulse to tone temporarily.
•
If paper is jammed in the ADF, the jammed page has not been scanned properly. When the
machine is in Immediate Transmission mode, resend the fax starting from the jammed page.
When in Memory Transmission mode, scan the entire originals again.
•
You can also specify a fax destination using the Quick Dial, Speed Dial, Broadcast, or Redial
functions. For details, see "Using the Fax Function", User Guide.
•
By default, the machine is set to print a transmission report automatically after a fax transmis-
sion. To change this setting, see "Confi guring the Machine Using the Control Panel", User
Guide.
•
For information about originals, see "Getting Started",
•
For information about removing jammed paper, see "Removing Paper Jams" on page 29.
", " ", and space.
" in a fax number. " " switches the dialing
User Guide.
21