Sharp DX-C200 Hızlı Kılavuz - Sayfa 21

Hepsi Bir Arada Yazıcı Sharp DX-C200 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Sharp DX-C200 44 sayfaları. Digital full colour multifunctional system
Ayrıca Sharp DX-C200 için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

If you have more originals to scan, press [Yes] within 60 sec-

onds, place the next original on the exposure glass, and then

press [OK]. Repeat this step until all originals are scanned.

If you do not press [Yes] within 60 seconds, the machine will start to dial

the destination.

When all originals have been scanned, press [No] to start

sending the fax.

•

To cancel sending a fax, press the [Facsimile] key, and then press the [Clear/Stop] key.

•

A fax number can contain 0 to 9, pause, "

•

If necessary, insert a pause in a fax number. The machine pauses brieﬂ y before it dials the

digits following the pause.

•

To use tone services on a pulse-dialing line, insert "

mode from pulse to tone temporarily.

•

If paper is jammed in the ADF, the jammed page has not been scanned properly. When the

machine is in Immediate Transmission mode, resend the fax starting from the jammed page.

When in Memory Transmission mode, scan the entire originals again.

•

You can also specify a fax destination using the Quick Dial, Speed Dial, Broadcast, or Redial

functions. For details, see "Using the Fax Function", User Guide.

•

By default, the machine is set to print a transmission report automatically after a fax transmis-

sion. To change this setting, see "Conﬁ guring the Machine Using the Control Panel", User

Guide.

•

For information about originals, see "Getting Started",

•

For information about removing jammed paper, see "Removing Paper Jams" on page 29.

", " ", and space.

" in a fax number. " " switches the dialing

User Guide.