Sharp MX-2300N Guide Instrukcja rozwiązywania problemów - Strona 37

Przeglądaj online lub pobierz pdf Instrukcja rozwiązywania problemów dla Wszystko w jednej drukarce Sharp MX-2300N Guide. Sharp MX-2300N Guide 44 stron. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Również dla Sharp MX-2300N Guide: Specyfikacje (2 strony), Podręcznik bezpieczeństwa (28 strony), Podręcznik archiwizacji dokumentów (47 strony), Instrukcje skanowania do wiadomości e-mail (7 strony), Instrukcja konfiguracji oprogramowania (48 strony)

Drukuj stronę

Other Problems

Problem

The touch panel

screen is difficult to

view.

You were logged out

without having

performed logout

yourself.

You forgot the

administrator

password.

When the main power

is switched off, the

main power indicator

on the operation panel

does not turn off.

Point to check

Is the display contrast properly

adjusted?

Did Auto Clear activate?

Was the administrator password

changed from the factory default

setting?

Has the power has been turned off by

pressing the [POWER] key (

the operation panel and has a certain

amount of time elapsed since then?

Adjust the contrast using "Display Contrast" in the

system settings.

➞ System Settings > "Default Settings" > "Display

Contrast"

When user authentication is used, the currently logged

in user will be automatically logged out if Auto Clear

activates. (Except when in PC scan mode.)

If you are the administrator, you can change the time

setting of Auto Clear or disable Auto Clear in "Auto

Clear Setting".

➞ System Settings (Administrator) > "Operation

Settings" > "Auto Clear Setting"

Contact your dealer or nearest authorised service

representative.

* For the factory default administrator password, see "TO

THE ADMINISTRATOR OF THE MACHINE" in the

Safety Guide. After changing the password, take special

care to remember it.

If the main power is switched off more than

) on

approximately one minute after the power has been

turned off by pressing the [POWER] key (

operation panel, the main power indicator on the

operation panel will not turn off immediately. (The

indicator will remain on for approximately another

minute. This is normal and does not indicate a failure.)

Solution

) on the