Digital Alert Systems R232-48VDC Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Router bezprzewodowy Digital Alert Systems R232-48VDC. Digital Alert Systems R232-48VDC 8 stron. Multiport rf router
Drukuj stronęThis document is intended to provide a brief product installation guideline. For more
information on using and controlling the devices please refer to the document
"Monroe X-point Control Protocol MXCP™ R232 MultiPort RF Router
Operation/Interface Manual" which describes the data connection and interface
parameters for each type of interface.
2 Power Connections
As mentioned above the R232 and R232-48VDC differ by their respective power
supplies and therefore have different connection types reflective of the input style.
Although the inputs differ the connection points and cable arrangements are the
same.
Both models feature the patented Pocket Power Supply™ which is a unique opening
on the right side of the chassis (facing the front) for power input. This is shown in
Figure 3 below.
Along the same side of the chassis is the power cable management tray, this allows
the power cable to be cleanly supported along the edge and toward the rear of the
chassis.
2.1.1 R232 Power Connections - AC
The in the pocket power supply of the model R232 is an International
Electrotechnical Commission (IEC) standard receptacle as shown in Figure 4 below.
Figure 4: R232 Pocket Power Supply with IEC receptacle for AC input.
R232 / R232-48VDC Installation Guide
Figure 3: Position of Pocket Power Supply opening.
Pocket Power Supply
TM
Page 4 of 8
opening