Shimano BR-IM86 Podręcznik sprzedawcy - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik sprzedawcy dla Akcesoria rowerowe Shimano BR-IM86. Shimano BR-IM86 27 stron. Hub roller brake

Drukuj stronę

INSTALLATION

Installation of the brake cable

Rear side

(A)

(B)

To be continued on next page

After checking that the cable

(C)

adjustment barrel (B) and adjustment

nut (A) are fully tightened, insert the

outer holder unit (C) into the inner

cable in the direction shown in the

illustration.

After checking that the marking of the

back side of the inner cable fixing bolt

(a)

unit (D) is "R", pass the inner cable

through the hole of the inner cable

fixing bolt unit.

(D)

Place the components as shown in the

following figure and tighten the inner

cable fixing nut (E).

(b)

Use (b) 99 mm of TL-IM21 (F) to

(E)

tighten the inner mounting nut as

shown in the illustration.

(F)

(a)

"R" marking

(A)

Adjustment nut

(B)

Cable adjustment barrel

(C)

Outer holder unit

(D)

Inner cable fixing bolt unit

(E)

Inner cable fixing nut

(F)

TL-IM21

Tightening torque

6 - 8 N·m

NOTE

•

After tightening, check that the

orientations of the inner cable fixing nut

and inner cable are correct as shown in

the illustration.

•

Never tighten the inner cable fixing bolt

with it attached to brake. The

orientations of the inner cable fixing nut

and inner cable will become improper as

shown in the illustration, which may

cause the inner cable fixing bolt to

detach from the brake body.