Siemens SIMATIC NET RUGGEDCOM i801 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe Siemens SIMATIC NET RUGGEDCOM i801. Siemens SIMATIC NET RUGGEDCOM i801 36 stron. Rugged ethernet switches
Również dla Siemens SIMATIC NET RUGGEDCOM i801: Instrukcja instalacji (38 strony)
Drukuj stronę
Chapter 1
Introduction
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Hazardous Location Certification: Class I, Division 2
• -20 to +60 °C (-4 to 140 °F) operating temperature (optional -40 to +85°C or -40 to 185 °F)
• Conformal coated printed circuit boards (optional)
• Die cast aluminum enclosure
Memory Options
• Removable microSD/microSDHC card
Power Supply
• Dual low-voltage DC inputs: 24 VDC (9-32 VDC)
• Compression fit connections
• CSA/UL 60950 safety approved to 85 °C (185 °F)
Section 1.2
Description
The RUGGEDCOM i801 features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
1
2
3
Figure 1: RUGGEDCOM i801
1. Failsafe Alarm Relay 2. Power Supply Terminal Block 3. Chassis Ground Terminal 4. POWER LEDs 5. ALARM LED 6. Fiber Optic or
Copper Gigabit Ethernet Port 7. Port Status LED 8. Copper Ethernet Ports 9. Access Plate 10. RS-232 Console Port (RJ-45)
Failsafe Alarm Relay
2
5
4
6
7
8
Latches to default state when a power disruption or other alarm condition occurs. For more
information, refer to:
•
Section 2.4, "Connecting the Failsafe Alarm Relay (If Equipped)"
•
Section 4.3, "Failsafe Alarm Relay Specifications"
Installation Guide
9
10
RUGGEDCOM i801
Description