Siemens SIMATIC NET RUGGEDCOM i801 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe Siemens SIMATIC NET RUGGEDCOM i801. Siemens SIMATIC NET RUGGEDCOM i801 36 stron. Rugged ethernet switches
Również dla Siemens SIMATIC NET RUGGEDCOM i801: Instrukcja instalacji (38 strony)
Drukuj stronę
RUGGEDCOM i801
Installation Guide
Power Supply Terminal Block
POWER LEDs
ALARM LED
Port Status LED
Communication Ports
Access Plate
RS-232 Console Port
Description
A pluggable terminal block. For more information, refer to:
•
Section 2.5, "Connecting Power"
•
Section 4.1, "Power Supply Specifications"
Illuminate when power is being supplied to the device by the respective power source.
Color
Green
Red
Off
Illuminates when an alarm condition exists.
Indicates the status of the associated port.
State
Solid
Blinking
Off
Receive and transmit data, as well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available for the RUGGEDCOM i801, refer to
Chapter 3, Communication
Ports.
The removable access plate provides access to the microSD/microSDHC slot. Use a microSD/
microSDHC card to load/store the firmware and configuration for the device. For information
about using a microSD/microSDHC card, refer to
MicroSD/MicroSDHC
Card".
The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to
Section 2.6, "Connecting to the
Description
Device ready
Device booting up
No power
Description
Link
Activity
No link/activity
Section 2.8, "Inserting/Removing the
Device".
Chapter 1
Introduction
3