Siemens SIMATIC NET RUGGEDCOM RS1600 Instrukcja instalacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe Siemens SIMATIC NET RUGGEDCOM RS1600. Siemens SIMATIC NET RUGGEDCOM RS1600 42 stron. Rugged ethernet switches
Również dla Siemens SIMATIC NET RUGGEDCOM RS1600: Instrukcja instalacji (42 strony)
Drukuj stronę
2.
2.4
Connecting Power
The RUGGEDCOM RS1600 supports single or dual redundant high AC, high DC and/or
low DC power supplies. The use of two power modules is recommended to provide
redundancy and load balancing.
The RUGGEDCOM RS1600 can be equipped with either a screw-type or pluggable
terminal block, which provides power to both power supplies. The screw-type
terminal block is installed using Philips screws and compression plates, allowing
either bare wire connections or crimped terminal lugs. Use #6 size ring lugs for
secure, reliable connections under severe shock or vibration.
•
•
•
RUGGEDCOM RS1600
Installation Manual, 11/2022, C79000-G8976-1013-04
1
1
Screw
1
Panel/DIN Rail Adapter
2
Figure 2.3
Panel Mounting
Install the supplied screws to secure the adapters to the panel.
NOTICE
For maximum redundancy in a dual power supply configuration, use two
independent power sources.
For 100-240 VAC rated equipment, an appropriately rated AC circuit breaker
must be installed.
For 88-300 VDC rated equipment, an appropriately rated DC circuit breaker must
be installed.
Installing Device
2.4 Connecting Power
2
11