Siemens SITRANS WW300 Instrukcja obsługi - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Siemens SITRANS WW300. Siemens SITRANS WW300 28 stron. Weighfeeders
Również dla Siemens SITRANS WW300: Instrukcja obsługi (42 strony)
Drukuj stronę
Quick Start Up Overview
1.
Verify that the weighfeeder is installed properly as described in the "Mechanical
installation" on page 7. Verify that the belt is tracking and the shear gate (if used) is
properly set.
2.
Verify that the weighfeeder, integrator/controller, and variable speed drive (AC or DC,
if present) are all properly wired.
3.
Verify that the data on the design data sheet included with this manual is correct
and modify if required.
4.
Refer to the supplied integrator/controller information for calibration and
configuration information.
7ML19985MQ01
SITRANS WW300 - OPERATING INSTRUCTIONS
Page 17