Siemens SITRANS WW300 Kullanım Talimatları Kılavuzu - Sayfa 21
Endüstriyel Ekipmanlar Siemens SITRANS WW300 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS WW300 28 sayfaları. Weighfeeders
Ayrıca Siemens SITRANS WW300 için: Kullanım Talimatları Kılavuzu (42 sayfalar)
Sayfayı Yazdır
Quick Start Up Overview
1.
Verify that the weighfeeder is installed properly as described in the "Mechanical
installation" on page 7. Verify that the belt is tracking and the shear gate (if used) is
properly set.
2.
Verify that the weighfeeder, integrator/controller, and variable speed drive (AC or DC,
if present) are all properly wired.
3.
Verify that the data on the design data sheet included with this manual is correct
and modify if required.
4.
Refer to the supplied integrator/controller information for calibration and
configuration information.
7ML19985MQ01
SITRANS WW300 - OPERATING INSTRUCTIONS
Page 17