Epson 1810p - PowerLite XGA LCD Projector Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Projektor Epson 1810p - PowerLite XGA LCD Projector. Epson 1810p - PowerLite XGA LCD Projector 27 stron. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Również dla Epson 1810p - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Szybka konfiguracja (2 strony), Instrukcja obsługi (47 strony), Biuletyn wsparcia produktu (5 strony), Deklaracja zgodności (4 strony), Lista części (1 strony), Broszura (2 strony), Biuletyn wsparcia produktu (41 strony)

Epson 1810p - PowerLite XGA LCD Projector Podręcznik użytkownika
Use the figure below to help you determine placement. Image
size increases with distance, but can vary depending on how you
position the zoom ring and whether you've adjusted the image
with other settings.
TBD
5.7 to 9.4 ft
29.7 to 48.2 ft
Distance from screen
Also keep these considerations in mind:
❏ Place the projector on a sturdy, level surface.
❏ Make sure there is plenty of space for ventilation around and
under the projector. Do not set the projector on top of
anything that could block the vents under the projector.
❏ Make sure the projector is within 10 feet of a grounded
electrical outlet or extension cord.
Ideally, you should place the projector directly in front of the
center of the screen, facing it toward the screen squarely. The
base of the lens should be at about the level of the bottom of the
screen.
Projector
If you place the projector below screen level, you'll have to tilt it
up by extending the front adjustable foot. This causes the image
to become "keystone" shaped, but you can correct the
distortion.

Turning On and Off the Projector

Turning On the Projector

Turn on any connected computer or video equipment before
starting the projector so it can automatically detect and display
the image source. If you turn on the projector first or have
multiple pieces of connected equipment, you may have to select
the image source manually (see page 5).
2.7 to 4.6 ft
Screen
Follow these steps to turn on the projector:
1. Open the A/V mute slide (lens cover).
2. Plug one end of the power cable into the projector, and the
other end into an electrical outlet.
The
light turns orange.
Power
Power
light
3. Press the P
Power
of the projector.
3/08
PowerLite 1810p/1815p
button on the remote control or on top
PowerLite 1810p/1815p
3
-