Epson 1810p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 3

Projektör Epson 1810p - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 1810p - PowerLite XGA LCD Projector 27 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson 1810p - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Hızlı Kurulum (2 sayfalar), Kullanım Kılavuzu (47 sayfalar), Ürün Destek Bülteni (5 sayfalar), Uygunluk Beyanı (4 sayfalar), Parça Listesi (1 sayfalar), Broşür (2 sayfalar), Ürün Destek Bülteni (41 sayfalar)

Sayfayı Yazdır

Epson 1810p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu

Use the figure below to help you determine placement. Image

size increases with distance, but can vary depending on how you

position the zoom ring and whether you've adjusted the image

with other settings.

TBD

5.7 to 9.4 ft

29.7 to 48.2 ft

Distance from screen

Also keep these considerations in mind:

❏ Place the projector on a sturdy, level surface.

❏ Make sure there is plenty of space for ventilation around and

under the projector. Do not set the projector on top of

anything that could block the vents under the projector.

❏ Make sure the projector is within 10 feet of a grounded

electrical outlet or extension cord.

Ideally, you should place the projector directly in front of the

center of the screen, facing it toward the screen squarely. The

base of the lens should be at about the level of the bottom of the

screen.

Projector

If you place the projector below screen level, you'll have to tilt it

up by extending the front adjustable foot. This causes the image

to become "keystone" shaped, but you can correct the

distortion.

Turning On and Off the Projector

Turning On the Projector

Turn on any connected computer or video equipment before

starting the projector so it can automatically detect and display

the image source. If you turn on the projector first or have

multiple pieces of connected equipment, you may have to select

the image source manually (see page 5).

2.7 to 4.6 ft

Screen

Follow these steps to turn on the projector:

1. Open the A/V mute slide (lens cover).

2. Plug one end of the power cable into the projector, and the

other end into an electrical outlet.

The

light turns orange.

Power

light

3. Press the P

Power

of the projector.

3/08

PowerLite 1810p/1815p

button on the remote control or on top

PowerLite 1810p/1815p