Siemens XQG90-WM14S7600W Instrukcja obsługi i instrukcja instalacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Siemens XQG90-WM14S7600W. Siemens XQG90-WM14S7600W 44 stron.

Drukuj stronę

Information on the display

panel

Display

The door cannot be

locked, please open the

door again, then close it

and select Start/Reload

Please open the tap

Please clean pump

Pause: Reload is not pos-

sible

Door cannot be unlocked:

Water level or tempera-

ture is too high

Auto power-off in ... sec-

onds

Water cooling

Other displays

Cause/Remedy

Washing may be caught. Please open and close washing machine door again

and select Start/Reload Ü.

If required, shut washing machine door or remove washing and shut again.

If required, switch appliance off and on again; set programme and make individ-

ual settings; start programme.

Turn on tap fully.

Supply hose kinked/jammed.

Water pressure too low. Clean the filter.

Drain pump blocked. Clean the drain pump.

The water drainage pipe/drain hose is blocked. Clean the drainage hose on the

siphon.

Water level or temperature is too high.

Select Start/Reload Ü to continue the programme.

Water level or temperature is too high.

Select Start/Reload Ü to continue the programme.

Appliance automatically switches off after ... seconds if it is not operated for

a prolonged period. In order to cancel the programme, press any button.

To protect the wastewater pipes, the hot detergent solution is cooled before

being drained.

Turn the programme selector to Off. Appliance is switched off. Wait 5 s and

switch on again. If the display is indicated again, call customer service.

~ Page 33

Faults and what to do about them