Siemens XQG90-WM14S7600W Instrukcja obsługi i instrukcja instalacji - Strona 39

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Siemens XQG90-WM14S7600W. Siemens XQG90-WM14S7600W 44 stron.

Drukuj stronę
Do not touch the hot washing water.
Caution!
Water damage
If the attached drainage hose slips out
of the washbasin due to high water
pressure when draining the appliance,
leaking water may cause damage.
Secure the drainage hose to prevent
it from slipping out of the washbasin.
Caution!
Damage to appliance/textiles
If the end of the drainage hose is
immersed in the drained water, water
may be drawn back into the appliance
and damage the washer dryer and/or
textiles.
Ensure that:
the sealing plug does not block the
■
outflow of the washbasin.
the water drains quickly enough.
■
the end of the drainage hose is not
■
immersed in the drained water.
Installing the drainage hose:

Drainage into a siphon

The connection point must be secured
with a Ø 24–40 mm hose clip
(specialist store).
Connecting
Installation and connection
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connecting

Alignment

Loosen lock nut in a clockwise
1.
direction with a wrench.
Check alignment of the washing
2.
machine with a spirit level and, if
required, correct. Adjust the height
by rotating the foot.
All four feet must be firmly on
Note:
the floor.
The washing machine must not
wobble!
Tighten the lock nut against the
3.
housing.
Grip the foot and do not adjust the
height.
Notes
– The lock nuts on all four
appliance feet must be screwed
tightly against the housing!
– Loud noise formation, intense
vibrations and "wandering" may
be due to incorrect alignment!
en
39