Siemens TF1 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens TF1. Siemens TF1 16 stron.

Drukuj stronę

1. Table of Contents

The hotplates

Hotplate

Single hotplate

Flexible hotplate

Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Cooking guidelines table

The table below contains some examples.

Cooking times depend on the power level, type, weight and

quality of the food. As such they are approximate.

Power levels affect cooking results.

Melt

Chocolate, chocolate coating, butter, honey

Gelatine

* Uncovered cooking

** Uncovered

Activating and deactivating

Use a correctly sized pan.

See "flexible hotplate" section

symbol. The indicator above the

symbol until the indicator above the

Even when switched off, the

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

indicators and the selected power level will appear alternately.

Setting the power level

The hob must be switched on.

Press the

symbol to select the power level.

the power level indicator and the symbol

corresponding hotplate.

Slide your finger over the programming panel until the

required power level is displayed.

Select the hotplate and set the required low heat level using

the programming panel.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

Upon selecting a hotplate the

■

then proceed to be adjusted.

If no pan has been placed on the induction hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

When heating purées, creams and thick sauces, stir

occasionally.

Use power level 9 to begin cooking.

Power level

1-1.

light will remain on as long as

•

appears on

‹

on the

‹

in the programming panel.

symbol is displayed. It may

Cooking time

(minutes)

•