Siemens TF1 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens TF1. Siemens TF1 16 stron.

Drukuj stronę

1. Table of Contents

Flexible zone

This may be used as one complete hotplate or two individual

hotplates depending on the actual cooking needs.

Operation.

It consists of several independently controlled inductors. When

the zone is working, those inductors that are not covered by

cookware are automatically turned off.

Advice on using cookware

To ensure that the cookware is detected and heat is distributed

evenly, correctly centre the cookware:

in the upper or lower part of the flexible zone, when the

■

cookware is smaller than 13 cm (see diagram)

or in one of the two halves of the flexible zone, when the

■

cookware is larger than 13 cm (see diagram).

! FP

When using cookware of a different size or made of a different

material, noise and vibrations that do not affect the correct

working of the zone may occur.

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

4 seconds. The

symbol lights up for 10 seconds. The

range is locked.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Restrictions when using

This function may be used for all hotplates, provided that the

other hotplate in the same group is not turned on. (See figure)

Otherwise, the

and

symbols will flash on the display of the

›

selected hotplate; then the power level

without the function being activated.

symbol for approx.

is automatically set

Consisting of two independent zones

The flexible zone can be used normally as two independent

hotplates.

How to activate

See "adjusting the hotplate" section.

As one hotplate

To use the entire hotplate with all individual zones.

How to activate

The hob must be switched on.

Place the cookware and press the

lights up. The flexible hotplate has been activated. Then slide

your finger over the programming panel until the required

power level is displayed.

To change the power level: Select the flexible hotplate by

pressing the symbol

and changing the power level with the

programming panel

To add more cookware

Press the symbol

so that the cookware is detected.

To deactivate

Set to 0 on the programming panel.

To use as two separate hotplates once again

Press either of the symbols

that form part of the flexible hotplate. The flexible hotplate is

turned off and operates once again as two separate hotplates.

To deactivate: press and hold the

4 seconds. The lock is now deactivated.

Activating and deactivating the childproof

lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

See the "Basic Settings" section.

*URXS

symbol. The

Nþ

on one of the two hotplates

symbol for approx.

*URXS

indicator