Cisco 7970G - IP Phone VoIP Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco 7970G - IP Phone VoIP. Cisco 7970G - IP Phone VoIP 21 stron. Unified ip phones
Również dla Cisco 7970G - IP Phone VoIP: Przygotowanie do instalacji (17 strony), Instrukcja instalacji (19 strony), Rozwiązywanie problemów i konserwacja (25 strony)

Transferring Calls

To transfer a call without talking to the transfer recipient, use the following method:

1. From an active call, press Transfer.

2. Enter the target number.

3. Press Transfer again to complete the transfer or EndCall to cancel.

If your phone supports on-hook transfer, you can alternately complete the transfer by hanging up.

Note

To talk to the transfer recipient before transferring a call (consult transfer), use the following method:

1. From an active call, press Transfer.

2. Enter the target number.

3. Wait for the transfer recipient to answer.

4. Press Transfer again to complete the transfer or EndCall to cancel.

If your phone supports on-hook transfer, you can also complete the transfer by hanging up.

Note

To redirect a ringing call to your voice messaging system, press DND. The call is automatically transferred to your voice message

greeting.

Transferring Calls to Voice Mail

To transfer a call to the recipient's voice mail, use the following method:

1. Press TrnsfVM.

2. Enter the recipient's extension number and press TrnsfVM again.

To set up call forwarding on your primary line, press CFwdALL and enter a target phone number exactly as you would dial it

from your phone. For example, enter an access code or the area code, if necessary. You can forward your calls to a traditional

analog phone or to another IP phone, although your system administrator can restrict the call forwarding feature to numbers

within your company. Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not enabled,

the call will ring as usual. Your system administrator can change call forwarding conditions for your phone lines.

To cancel call forwarding on your primary line, press CFwdALL.

To verify that call forwarding is enabled on your primary line, look for:

• The call forward icon above the primary phone number:

• The call forward target number in the status line.

Use the Do Not Disturb (DND) feature to block incoming calls on your phone with a busy tone. When DND is turned on, the

DND blocking feature applies to all the lines on your phone. Received calls are not logged to the Missed Calls directory on your

phone.

When DND and Call Forward All are both enabled on your phone, Call Forward All takes precedence on incoming calls. That

is, calls will be forwarded and the caller will not hear a busy tone.

If DND is not enabled on your phone, see your system administrator.

To activate DND, use the following method:

1. Press the more soft key to locate the DND soft key.