Cisco 12016 Instrukcja wymiany - Strona 27

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Router sieciowy Cisco 12016. Cisco 12016 32 stron. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Również dla Cisco 12016: Instrukcja rozpakowywania Podręcznik (28 strony), Arkusz danych (9 strony), Instrukcja obsługi (16 strony), Instrukcja wymiany (18 strony)

Drukuj stronę

Translated Safety Warnings and Agency Approvals

The complete list of translated safety warnings and agency approvals is available in the Regulatory

Compliance and Safety Information for the Cisco 12000 Series Internet Router publication.

(Document Number 78-4347-xx.)

Electromagnetic Compatibility Regulatory Statements

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case users will be

required to correct the interference at their own expense.

Modifying the equipment without Cisco's authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulation and you may be required to correct any interference to

radio or television communication at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference

stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment

causes interference to radio or television reception, try to correct the interference by using one or more

of the following measures:

•

CISPR 22

This apparatus complies with CISPR 22/EN55022 Class B radiated and conducted emissions

requirements.

Canada

English Statement of Compliance

This class A digital apparatus complies with Canadian ICES-003.

French Statement of Compliance

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

78-16082-01

Turn the television or radio antenna until the interference stops.

Move the equipment to one side or the other of the television or radio.

Move the equipment farther away from the television or radio.

Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,

make certain the equipment and the television or radio are on circuits controlled by different circuit

breakers or fuses.)

Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions

Regulatory, Compliance, and Safety Information