Cisco 2525 Podręcznik konfiguracji - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Router sieciowy Cisco 2525. Cisco 2525 23 stron. Troubleshooting guide
Również dla Cisco 2525: Podręcznik konfiguracji (23 strony), Przegląd (10 strony), Przygotowanie do instalacji (19 strony), Instrukcja rozwiązywania problemów (4 strony)

Configuring the Router

At any time during the System Configuration Dialog, you can request help by typing a

question mark (?) at a prompt.

Before proceeding with the System Configuration Dialog, obtain from your system

administrator the node addresses and the number of bits in the subnet field (if applicable)

of the Ethernet and synchronous serial ports. For more information about Internet Protocol

(IP) addresses and subnets, refer to the publication Internetworking Technology Overview.

(See the section "Getting More Information" at the end of this chapter.)

Take the following steps to configure the router using the System Configuration Dialog:

Step 1

Note

2 stop bits.

Step 2

Note

you selected. The screen displays in this section are for reference only and may not exactly

reflect the screen displays on your console.

4-6 Cisco 2524 and Cisco 2525 Router User Guide

Connect a console terminal to the console connector on the rear panel of your

router, and turn ON power to the router. (For more information, refer to the section

"Connecting the Console Terminal and Modem" in the chapter "Installing the

Cisco 2524 and Cisco 2525 Routers.")

The default parameters for the console port are 9600 baud, 8 data bits, no parity, and

After about 30 seconds, information similar to the following is displayed on the

console screen.

The messages displayed vary, depending on the Cisco IOS release and feature set

When you see this information, you have successfully booted your router:

System Bootstrap, Version X.X(XXXX) [XXXXX XX], RELEASE SOFTWARE

2500 processor with 4096 Kbytes of main memory

Notice: NVRAM invalid, possibly due to write erase.

F3: 5797928+162396+258800 at 0x3000060