Cisco 7200 VXR Series Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco 7200 VXR Series. Cisco 7200 VXR Series 48 stron. Preparing for installation
Również dla Cisco 7200 VXR Series: Arkusz danych (12 strony), Podręcznik (14 strony)
Drukuj stronę
Figure 1
Installing a CompactFlash Disk
1
O R K P R
O C E S S IN
G E N G IN
C O M PA
C T F L A
1
Inserting the CompactFlash Disk
2
Releasing the CompactFlash Disk
Step 1
Turn the CompactFlash Disk so that the label is facing down. It is keyed and cannot be inserted incorrectly.
Step 2
Slide the CompactFlash Disk into the CompactFlash Disk slot.
See the Network Processing Engine and Network Services Engine Installation and Configuration document for more
information about using the NPE-G1 or NPE-G2.
Figure 2
Installing the GBIC in an NPE-G1
2
3
1
1
GBIC
2
Alignment groove
Step 1
Insert the Gigabit Ehternet Gigabit Interface Converter (GBIC) in a GBIC slot on the NPE-G1. The GBIC is keyed so
that it can only be inserted correctly.
Step 2
Repeat Step 1 until the GBICs you ordered are installed.
8
2
O R K P R
O C E S S IN
G E N G IN
E - G 1
E - G 1
C O M PA
C T F L A
S H
3
S H
3
Removing the CompactFlash Disk
3
GBIC slot
4
Plug
3
O R K P R
O C E S S IN
G E N G IN
E - G 1
C O M PA
C T F L A
S H
ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER
4