DigitaLinx DL-HD2-RX Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik DigitaLinx DL-HD2-RX. DigitaLinx DL-HD2-RX 13 stron.
Również dla DigitaLinx DL-HD2-RX: Podręcznik szybkiej instalacji (8 strony)

Drukuj stronę

Quick Start

1.

Connect HDBaseT Link

2.
Connect A/V sources
3.
Connect USB peripherals
4.
Connect display
5.
Connect audio (optional)
6.
Connect and configure control (optional)
7.
Apply power
Connect HDBaseT Link

HDBaseT Connection

Connect a category cable from a compatible HDBaseT 2.0 transmitter HDBaseT output to the DL-HD2-RX
receivers HDBaseT input.
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between the transmitter and
receiver
To ensure proper performance of the DL-HD2-RX it is recommended that you use solid core
shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform well but
may not support power over HDBaseT reliably.
For optimized performance use the following Liberty Wire and Cable branded cabling;
Category 6 plenum; 24-4P-P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A NON -plenum; 24-4P-L6ASH

Installation Instructions

When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
DL-1H1V1U-WP-W Owners Manual
1
8
TIA/EIA-568B
Pin 1
Orange/White
Pin 2
Orange
Pin 3
Green/White
Pin 4
Blue
Pin 5
Blue/White
Pin 6
Green
Pin 7
Brown/White
Pin 8
Brown
7