6
Connect the fax line
To fax, connect a phone cord to a telephone wall jack and
to the LINE port on the back of your product. To connect a
telephone or answering machine, use the EXT. port on your
product. See the Quick Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.
7
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is
NOT CONNECTED to your
computer.
Windows
: If you see a Found New
®
Hardware screen, click Cancel and
disconnect the USB cable. You can't
install your software that way.
2
Insert the product CD.
3
W indows: If you see the AutoPlay window, click Run
Setup.exe. If you see the User Account Control screen,
click Yes or Continue.
Mac OS
X: Double-click the
®
4
C lick Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
5
W hen you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Epson icon.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend using
a temporary USB connection to simplify wireless setup. After
the printer is connected to the network, you will be prompted
to remove the cable.
If you're using Mac OS X 10.6.x or 10.7, or you don't have a
USB cable, you will need to use the control panel on the printer
to select wireless settings. Follow the instructions on your
computer screen during software installation; they will explain
how to connect the printer wirelessly this way.
M ake sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
You must install the software on every computer from which
you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow to
let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
Press the number buttons to select uppercase letters (ABC),
lowercase letters (abc), or numbers (123) and symbols
(*!#&).
Press each button repeatedly until you see the character you
want.
Press
or
to move the cursor.
Press
to delete a character.
Press
to insert a space
Press OK when you're finished entering your password.
You see error messages on the printer's screen.
See your Quick Guide for troubleshooting information.
network cable (not included).
®
Drukuj stronę