- ページ 3

オール・イン・ワン・プリンター Epson Artisan 837のPDF ここからスタートをオンラインで閲覧またはダウンロードできます。Epson Artisan 837 4 ページ。 Color inkjet printer
Epson Artisan 837 にも：クイックマニュアル (44 ページ), スタートアップマニュアル (4 ページ), 仕様 (2 ページ), ここからスタート (4 ページ), ここからスタート (2 ページ), よくある質問 (4 ページ), サービスマニュアル (20 ページ)

ページを印刷する

Connect the fax line

To fax, connect a phone cord to a telephone wall jack and

to the LINE port on the back of your product. To connect a

telephone or answering machine, use the EXT. port on your

product. See the Quick Guide for more details.

Note: If you're connecting to a DSL phone line, you must use a DSL

filter or you won't be able to fax. Contact your DSL provider for the

necessary filter.

Install software

Note: If your computer does not have a CD/DVD drive, you can

download the software from the Epson website (see "Epson technical

support").

Caution: Be sure to close your other programs, including any screen

savers and virus protection software, before beginning this software

installation.

M ake sure the printer is

NOT CONNECTED to your

computer.

Windows

: If you see a Found New

Hardware screen, click Cancel and

disconnect the USB cable. You can't

install your software that way.

Insert the product CD.

W indows: If you see the AutoPlay window, click Run

Setup.exe. If you see the User Account Control screen,

click Yes or Continue.

Mac OS

X: Double-click the

C lick Install (Windows) or Continue (Mac OS X) and

follow the instructions on your computer screen.

W hen you see the Select Your Connection screen, check

the "Connection options" section on this sheet for more

information. Then click Next (Windows) or Continue

(Mac OS X) and follow the instructions on your computer

screen.

Epson icon.

Connection options

Wireless connection

You must install the software on every computer from which

you want to print. For the first installation, we recommend using

a temporary USB connection to simplify wireless setup. After

the printer is connected to the network, you will be prompted

to remove the cable.

If you're using Mac OS X 10.6.x or 10.7, or you don't have a

USB cable, you will need to use the control panel on the printer

to select wireless settings. Follow the instructions on your

computer screen during software installation; they will explain

how to connect the printer wirelessly this way.

M ake sure you know your network name (SSID) and network

password:

• Network name

• Network password

If you don't have this information, contact the person who set

up your network.

Direct USB connection

Make sure you have a USB cable (not included).

Wired network connection

Make sure you have an Ethernet

You must install the software on every computer from which

you want to print.

Any problems?

If you experience problems during setup, see below:

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• If you see a firewall alert message, click Unblock or Allow to

let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. If it has uppercase (ABC) or lowercase (abc)

letters, make sure you enter them correctly.

Press the number buttons to select uppercase letters (ABC),

lowercase letters (abc), or numbers (123) and symbols

(*!#&).

Press each button repeatedly until you see the character you

want.

Press

to move the cursor.

Press

to delete a character.

Press

to insert a space

Press OK when you're finished entering your password.

You see error messages on the printer's screen.

See your Quick Guide for troubleshooting information.

network cable (not included).