Cisco CTS-SX10-K9 Podręcznik dla początkujących - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla System konferencyjny Cisco CTS-SX10-K9. Cisco CTS-SX10-K9 25 stron. Telepresence sx10 quick set
Drukuj stronęCisco TelePresence SX10 Quick Set
SX10 Quick Set
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product, to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the
Configuration
tab, and click
Configuration.
2. Open the
Provisioning
settings from the left column.
3. Select a supported provisioning infrastructure from the
Mode
drop down list:
•
VCS – Cisco Video Communication Server
•
CUCM – Cisco Unified Communications Manager
•
Auto - The system starts provisioning by first trying VCS
and then CUCM.
If you select Off, all configurations must be set manually on
the video system.
If you are changing a value setting,
you have to always click
save
to confirm the change.
Back to task overview
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents
Introduction
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
the respective input fields.
System
2. Enter the IP address or DNS name of the Cisco VCS
in the
Address
heading.
3. Enter the SIP
corresponding input field.
Have a look at the
more information about VCS provisioning.
Configuration
Configuration
LoginName
and
Password
input field under the
ExtermalManager
Domain
for the Cisco VCS in the
Cisco VCS provisioning
appendix for
12
Appendices
CUCM
Enter the IP address or DNS name of the UCM provisioning
server in the
Address
input field under the
in
heading.*
You can find more details about setting up Cisco UCM
provisioning in the
Administering TC endpoints on CUCM
guide.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contact
ExtermalManager