Cable Electronics CE Labs SW808HD Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy Cable Electronics CE Labs SW808HD. Cable Electronics CE Labs SW808HD 17 stron. High definition matrix switch
Drukuj stronęMATRIX SYSTEM AND CONTROL SYSTEM
CONNECTION - RS-232
PC RS-232, multi-Matrix (up to 32) connections are as shown below.
NOTES:
1. For RS-232 connections refer to photo below.
2. RS-232 or RS-485 baud rates: 9600bps, 8-bit data transmission
address, no, odd, or even parity, 1-bit stop address: (9600 - 8 - N - 1).
3. Serial connection between Matrix RS-485 as follows:
TX (+)
TX (+)
TX (-)
TX (-)
RX (+)
RX (+)
RX (-)
RX (-)
4. DIP switch 1-5 addresses must not set to same ID address.
Disconnect Function Keys
Close all the unused output ports.
A specific example of operation is described below:
The default input and output relations are shown below: