Sony 2005 SXRD KDS-R50XBR1 Instrukcja demontażu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja demontażu dla TV Sony 2005 SXRD KDS-R50XBR1. Sony 2005 SXRD KDS-R50XBR1 31 stron.
Chapter 4 - Optics Block & Fan Removal
Optics Block , Power Supply Block , and Fan Assembly Removal
Fan
Assembly
Tape
Clamp
Screws
Vertical
Bracket
Disconnect
Power cable
Release
wires
Squeeze Tabs
1
2
3
7
Before the Optical Block can
be removed the Fan assembly
must be removed.
First, remove cable clamp and
wire tape.
Remove the 5 screws and the
vertical bracket next to the fan
assembly.
Detach the Power Supply
Block from the fan housing.
Disconnect the power supply
cable.
Remove wires from the two
wire holders.
Squeeze the small tabs at the
top of the board to remove
board and lay to the side (the
red wires will remain
attached).