Argo DD Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Klimatyzator Argo DD. Argo DD 16 stron. Air conditioner without outdoor unit

CAUTION

After the selection of the installation site, according

to the above mentioned points, be sure not to make

holes in areas where electrical wiring or conduits are

located, damaging them.

Make sure that there are no obstacles in the conduits

inside the wall affecting the free circulation of the

external air. The unit must be kept at a minimum

distance of 80 cm from any wall or obstacle.

3.2 - HOW TO INSTALL THE UNIT

CAUTION

Do not mount the front panel and the bottom panel

until installation is complete.

- Apply at the wall the full scale diagram, fix and level it.

- Drill the two holes Ø 162 mm and the hole Ø 35 mm for

the condensate drainage toward the outside (assure a

positive slope toward the outside).

- Cut to size the supplied plastic sheets in order to obtain,

by rolling them, two tubes of the right size (it is necessary

to measure the thickness of the wall and subtract 70 mm

in order to leave enough space to the grilles).

FULL SCALE DIAGRAM

1013

355

Level

Mill

A Holes for rawl plugs Ø 9 mm

B Hole for electrical connection Ø 30 mm

C Holes for air Ø 162 mm

D Hole for condensate discharge Ø 35 mm

205

Full scale

diagram