Argo Husky Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo Husky. Argo Husky 8 stron. Evaporative air cooler

1. Display

2. Buttons

3. Signal receiver

4. Frontal flaps

5. Water tank level indicator

6. Multidirectional wheels (the rear ones

brake)

The appliance does not need to be installed.

Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a

sound to indicate that the appliance is in standby and can be switched on using the START/SPEED button. Pressing the

OFF button, the uni twill beep and turn off.

When you move the appliance, use the handle on the rear. Do not use this air cooler in a dust and high humid area or in

an area with a temperature above 40°C.

This product can be used either as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low,

medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with

not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level (marked on the

tank), the appliance emits a continuous sound for 10" to signal a low water level, then cooling mode is stopped. The unit

automatically shuts down when the tank is removed.

The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly

humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes

part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes

it feel as though the temperature has dropped.

V 12/15

DESCRIPTION OF PARTS

7. Handle

8. Remote control compartment

9. Operning for evaporative panel with dust

filter

10. Cord storage

11. Power cord

12. Water tank

13. Tank block

demineralized

water, up to but