Argo Husky Інструкція з експлуатації Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Кондиціонер Argo Husky. Argo Husky 8 сторінок. Evaporative air cooler
Друкувати сторінку1. Display
2. Buttons
3. Signal receiver
4. Frontal flaps
5. Water tank level indicator
6. Multidirectional wheels (the rear ones
brake)
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a
sound to indicate that the appliance is in standby and can be switched on using the START/SPEED button. Pressing the
OFF button, the uni twill beep and turn off.
When you move the appliance, use the handle on the rear. Do not use this air cooler in a dust and high humid area or in
an area with a temperature above 40°C.
This product can be used either as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low,
medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with
not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level (marked on the
tank), the appliance emits a continuous sound for 10" to signal a low water level, then cooling mode is stopped. The unit
automatically shuts down when the tank is removed.
The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly
humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes
part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes
it feel as though the temperature has dropped.
V 12/15
DESCRIPTION OF PARTS
HOW TO USE THE APPLIANCE
7. Handle
8. Remote control compartment
9. Operning for evaporative panel with dust
filter
10. Cord storage
11. Power cord
12. Water tank
13. Tank block
demineralized
9
water, up to but
12