Cisco Aironet 340 Series Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 stron. Usb client adapter
Również dla Cisco Aironet 340 Series: Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (13 strony), Informacje o wersji (14 strony), Skrócona instrukcja obsługi (16 strony), Skrócona instrukcja obsługi (12 strony)

Configure the Bridge

Assigning the SSID

Use the console port to set the Service Set

Identifier (SSID) that allows the wireless

bridge to communicate with other nodes.The

SSID is a unique, case-sensitive identifier that

is attached to selected packets sent out over

the radio network. Nodes associating to the

bridge must use the same SSID or their

association requests will be ignored.

Determine a unique SSID for the bridges and

make sure that all bridges in the network use

the same SSID.

On the terminal connected to the console

port, select Configuration from the Main

menu.

From the Configuration menu, select

Radio.

From the Radio menu, select SSID.

Enter a value for the SSID option. The

SSID can have up to 32 characters. All

devices in the same radio network must

use the same SSID. This value is case

sensitive.

Assigning IP Information

To enable remote access to the bridge using

Telnet, HTTP, or SNMP, you must assign an

IP address to the bridge.

Note: You can also assign other detailed

internet addressing options, such as gateway

address, subnet mask, or SNMP

configuration. Refer to the user guide on the

product CD for more information.

On the terminal connected to the

console port, select Configuration from

the Main menu.

From the Configuration menu, select

Ident.

Use the INADDR option to assign an IP

address. Be sure to assign a unique IP

address to each bridge.

Use the INMASK option to define the

internet subnet mask, if appropriate.

Use the GATEWAY option to define the

gateway address, if appropriate.