Cisco Aironet 340 Series 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Cisco Aironet 340 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 340 Series 12 페이지. Usb client adapter
Cisco Aironet 340 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (13 페이지), 릴리스 정보 (14 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (12 페이지)

Configure the Bridge
Assigning the SSID
Use the console port to set the Service Set
Identifier (SSID) that allows the wireless
bridge to communicate with other nodes.The
SSID is a unique, case-sensitive identifier that
is attached to selected packets sent out over
the radio network. Nodes associating to the
bridge must use the same SSID or their
association requests will be ignored.
Determine a unique SSID for the bridges and
make sure that all bridges in the network use
the same SSID.
1
On the terminal connected to the console
port, select Configuration from the Main
menu.
2
From the Configuration menu, select
Radio.
3
From the Radio menu, select SSID.
4
Enter a value for the SSID option. The
SSID can have up to 32 characters. All
devices in the same radio network must
use the same SSID. This value is case
sensitive.
Assigning IP Information
To enable remote access to the bridge using
Telnet, HTTP, or SNMP, you must assign an
IP address to the bridge.
Note: You can also assign other detailed
internet addressing options, such as gateway
address, subnet mask, or SNMP
configuration. Refer to the user guide on the
product CD for more information.
1
On the terminal connected to the
console port, select Configuration from
the Main menu.
2
From the Configuration menu, select
Ident.
3
Use the INADDR option to assign an IP
address. Be sure to assign a unique IP
address to each bridge.
4
Use the INMASK option to define the
internet subnet mask, if appropriate.
5
Use the GATEWAY option to define the
gateway address, if appropriate.
5