Sony MHC-NX1 Instrukcja obsługi - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-NX1. Sony MHC-NX1 44 stron. Mini hi-fi component system

Drukuj stronę

Recording a CD by specifying track

order (continued)

Press ∏ (P on the remote) to insert

a pause at the end of side A.

"P" appears in the display and the total

playing time resets to "0.00" in the

display.

Repeat steps 5 and 6 for tracks from

the same disc or steps 4 to 6 for

tracks from another disc to

programme the remaining tracks to

be recorded on side B.

Press CD SYNC.

Deck B stands by for recording and the

CD player stands by for playback. ·

(for front side) lights up.

Press DIRECTION repeatedly to

select A to record on one side.

Select ß (or RELAY) to record on

both sides.

Press REC PAUSE/START.

Recording starts.

To stop recording

Press π on the deck B or on the CD player.

To check the order

Press CHECK on the remote repeatedly. After

the last track, "CHECK END" appears.

To cancel Programme Edit

Press PLAY MODE repeatedly until

"PROGRAM" or "SHUFFLE" disappears

from the display.

Tip

When you want to reduce the hiss noise in low-level

high-frequency signals, press DOLBY NR so that

"DOLBY NR" appears after pressing CD SYNC.

Selecting tape length

automatically

— Tape Select Edit

You can check the most suitable tape length

for recording a CD. Note that you cannot use

Tape Select Edit for discs containing more

than 20 tracks.

Insert a CD.

Press CD.

Press EDIT (EDIT/PTY on

European model) once so that

"EDIT" flashes.

The required tape length for the

currently selected CD appears, followed

by the total playing time for side A and

side B respectively.

Notes

• You cannot use this function after programming.

In order to use this function, you must first cancel

the programme by pressing PLAY MODE

repeatedly until "PROGRAM" or "SHUFFLE"

disappears from the display.

• This function does not work when the total

playing time of the CD is shorter than 1 minute.

• Dolby NR is off and DIRECTION (A or RELAY)

is ß when the mains AC power supply is

switched off.