Cisco ATA 191 Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy Cisco ATA 191. Cisco ATA 191 30 stron. Analog telephone adapter
Również dla Cisco ATA 191: Podręcznik użytkownika (30 strony), Podręcznik administracyjny (4 strony), Podręcznik użytkownika (10 strony), Rozpocznij (8 strony), Podręcznik (10 strony), Skrócona instrukcja obsługi (13 strony), Instrukcja konfiguracji (6 strony), Podręcznik użytkownika (40 strony)

Get Started with Your New ATA

Warning

Wall Mounting

The ATA has two wall-mounted slots on the bottom panel. To mount the ATA on a wall, you need mounting

hardware (not included). Suggested hardware is illustrated (not true to scale).

Recommended hardware (not included): Two #6 pan head, 5/8 in., self-tapping screws with anchors for

sheet rock installation.

Note

Procedure

Step 1

Determine where you want to mount the unit. Verify that the surface is smooth, flat and dry.

Step 2

Drill two pilot holes into the surface 58 mm apart (about 2.28 in.).

Step 3

Insert a screw into each hole, leaving a gap of 5 mm (0.1968 in.) between the underside of each screw head

and the surface of the wall.

Step 4

Place the unit wall-mount slots over the screws and slide the unit down until the screws fit snugly into the

wall-mount slots.

Do not place anything on top of the ATA; excessive weight could damage it.

Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred

byinsecure wall-mounting.

Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager

Wall Mounting