Cisco Cisco ASA Series Montaż i połączenie - Strona 4
Przeglądaj online lub pobierz pdf Montaż i połączenie dla Sprzęt sieciowy Cisco Cisco ASA Series. Cisco Cisco ASA Series 12 stron.
Również dla Cisco Cisco ASA Series: Pierwsze kroki (31 strony), Montaż i połączenie (6 strony)
Drukuj stronę
Install the ASA 5506H-X in a DIN Rail
Figure 3: ASA 5506H-X in the Rack-Mount Shelf
Step 5
Carefully turn the tray right-side up and slide it into the rack-mounted shelf.
What to do next
You can now install the cables and power cord, as described in
Connectivity, on page
Install the ASA 5506H-X in a DIN Rail
You can use the 7.5-mm thick 45mm wide top hat DIN rail for the ASA 5506H-X. Secure the DIN rail to the
mounting surface approximately every 7.8 inches (200 mm) and use end-anchors appropriately.
Note
We recommend that you install the ASA 5506H-X on a steel DIN rail for extra stability.
To attach the ASA 5506H-X to a 35-mm wide DIN rail, follow these steps:
Step 1
Attach the DIN rail bracket to the back of the chassis using the four screws provided.
Mount and Connect
4
6.
Mount and Connect
Connect Cables, Turn on Power, and Verify