Cisco Cisco ASA Series 마운트 및 연결 - 페이지 4

{카테고리_이름} Cisco Cisco ASA Series에 대한 마운트 및 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco ASA Series 12 페이지.
Cisco Cisco ASA Series에 대해서도 마찬가지입니다: 시작하기 (31 페이지), 마운트 및 연결 (6 페이지)

페이지 인쇄

Install the ASA 5506H-X in a DIN Rail

Figure 3: ASA 5506H-X in the Rack-Mount Shelf

Step 5

Carefully turn the tray right-side up and slide it into the rack-mounted shelf.

What to do next

You can now install the cables and power cord, as described in

Connectivity, on page

Install the ASA 5506H-X in a DIN Rail

You can use the 7.5-mm thick 45mm wide top hat DIN rail for the ASA 5506H-X. Secure the DIN rail to the

mounting surface approximately every 7.8 inches (200 mm) and use end-anchors appropriately.

Note

We recommend that you install the ASA 5506H-X on a steel DIN rail for extra stability.

To attach the ASA 5506H-X to a 35-mm wide DIN rail, follow these steps:

Step 1

Attach the DIN rail bracket to the back of the chassis using the four screws provided.

Mount and Connect

Connect Cables, Turn on Power, and Verify