Cisco Firepower 4100 Series Instrukcja obsługi produktu - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Sprzęt sieciowy Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 17 stron. Rack-mount and ground the chassis
Również dla Cisco Firepower 4100 Series: Podręcznik (8 strony), Podręcznik konserwacji i aktualizacji (20 strony), Podręcznik (36 strony), Podręcznik (8 strony), Podręcznik (42 strony), Podręcznik (38 strony)

Drukuj stronę
Cisco Firepower 4100 Series Instrukcja obsługi produktu
Installation and Configuration

Connecting Access Points

After you have installed and configured the controller, use CAT-5, CAT-5e, CAT-6, or CAT-7 ethernet
cables to connect the access points to the network (Distribution System) as shown in the following
figure.
As soon as the controller is activated, it starts to scan for access points on all connected ports. When it
Note
detects an access point, it records its MAC address in its database. The Radio Resource Management
(RRM) function then automatically configures the access point to start transmitting and start allowing
clients to connect through the access points.
Figure 8

Where to Go from Here

You have completely installed the controller hardware.
•
•
•
78-17155-01
Access Points Connected to a Controller
Network
Access Points
Register your controller.
Refer to the Configuring the Cisco Wireless LAN Controllers in the Product Guide for more
information on configuring the controller.
Refer to the Product Guide for more information on configuring, operating, maintaining and
troubleshooting the controller.
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
Cisco Wireless
LAN Controller
Cisco 1000
Connecting Access Points
15