Digitrax DT400 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler Digitrax DT400. Digitrax DT400 9 stron.

If any locomotives are consisted, they should be removed from the consist

Clear Loco IDs (DT400/DT400R/DT402D)

Left speed indicator shows CN.

Ensure left smoke is flashing.

Press MU button.

Press N - to remove second locomotive

from consist

Ensure smoke is flashing on side to clear

locomitive ID.

Press LOCO button.

Locomotive ID is flashing.

Press EXIT button. This clears the

locomotive ID from the command station.

Note that pressing LOCO then DISP clears

the locomotive ID from the throttle, but the

command station continues to control the

locomotive. This allows another throttle

can take control of that locomotive by

entering the locomotive ID.

Repeat for opposite side.