Digitrax DT400 Manuel - Sayfa 7

Kontrolör Digitrax DT400 için çevrimiçi göz atın veya pdf Manuel indirin. Digitrax DT400 9 sayfaları.

If any locomotives are consisted, they should be removed from the consist
Clear Loco IDs (DT400/DT400R/DT402D)
Left speed indicator shows CN.
Ensure left smoke is flashing.
Press MU button.
Press N - to remove second locomotive
from consist
Ensure smoke is flashing on side to clear
locomitive ID.
Press LOCO button.
Locomotive ID is flashing.
Press EXIT button. This clears the
locomotive ID from the command station.
Note that pressing LOCO then DISP clears
the locomotive ID from the throttle, but the
command station continues to control the
locomotive. This allows another throttle
can take control of that locomotive by
entering the locomotive ID.
Repeat for opposite side.